[Celica RA45]

im in melbourne ,state of victoria. australia ok have had 2 red tops but have 1 fwd black top cover motor and 3 altezza black tops as well. the fwd black top with vvti only on the inlet has the same specs as the red top bar the headers which have cats built into them ,this motor has been transformed into a rwd motor with big cams forged pistons and rods and lightened crank etc this is the new grunter which will be going into the car at the end of the year aiming for 200 kws at back wheels plus
specs are 540 thou inlet exhaust 500 thou lift comp ratio 12.8 to 1 on 98 fuel longer rods ,2.5 kilos off the crank 3 kilo f/wheel ,trd exhaust trd inlet with my 50mm quads ,over size valves 1mm over size for both inlet and exhaust ,new valve springs titatium retainers and 34 mm inlet buckets or liftersthan the std 31 mm 1 ,cam still uses vvti for a total of 19 degress agianst 26 as std and this motor will be dry sumped as well