Toyota MR2 Message Board - View Single Post - 3S-GTE JDM 3rd Gen Turbo Engine 93NA -> Gen3 swap progress

stealth · 06-10-2005, 01:04 AM

Ok this is some info for those of you who can not get that metal line out. A guy on MR2OC told me it and it saved me alottt of time as mine was not going to come off.

Just look further down the line and disconnect it from the fuel filter and feet it through.

My Fuel pump swap took me about 10 hours. Honestly, i found it easy, but i bought a big ass jack for it, so i can get the car up high.

The reason it took me 10 hours was just, me taking my sweet time. The hardest part was removing the heatshields. I still have not installed the heatshields or undercarraige panels.

Just take your time and you will be fine.

06-10-2005, 01:04 AM	#101 (permalink)
stealth Boostin Join Date: Mar 2005 Location: Edmonton, Alberta, Canada Posts: 220 Thanks: 1 Thanked 0 Times in 0 Posts iTrader Rating: (2/100% )	Ok this is some info for those of you who can not get that metal line out. A guy on MR2OC told me it and it saved me alottt of time as mine was not going to come off. Just look further down the line and disconnect it from the fuel filter and feet it through. My Fuel pump swap took me about 10 hours. Honestly, i found it easy, but i bought a big ass jack for it, so i can get the car up high. The reason it took me 10 hours was just, me taking my sweet time. The hardest part was removing the heatshields. I still have not installed the heatshields or undercarraige panels. Just take your time and you will be fine.