|
When I was first developing an NA 91 MK2 for track use I originally planned to swap in the 93+ crossmember and rear toe links. What I found when setting the car up was that with a good mix of suspension components (coilovers or springs & dampers), camber, tire sizes, tire pressures and a tiny hint of rear toe the car's behavior both on and off the race track can be made reasonable and predictable.
Since then I've passed the 93+ rear suspension bits on to someone else and have been tracking a couple of different 91-92 MK2's almost every other weekend for most of the last summer. The only times I have spun the cars is when I have lifted the throttle mid-corner while driving right up against the traction limits. The one exception to that rule was when I hit some slick mud on a wet track while accelerating through a corner - again near my traction limits - the car also went around then.
My point is that if you're driving with a reasonable safety margin like you should be on public roads, then there are very few situations where you should spin the car. If you do run into one of those situations, I'm not sure the differences between the 91 & 93 suspension would make a difference.
|