Toyota MR2 Message Board - View Single Post

GReddySetGO · 11-07-2006, 08:56 PM

Is anyone seriously interested in getting some carbon fiber doors made for our cars? This is going to be a door shell, you reuse your stock door trim on the inside.

I am still shopping aroudn to see who I will have make this for us. I would like to go Seibon because of their known quality and my personal experiences with them have been fantastic in both quality, fitment and service. They are reputable and have been around, which is why I would preffer them. However their costs are a little pricey in comparison to some other companies, and their buy-in for a custom part like this is 20 minimum orders.

So all of this is going to be dependant on who is SERIOUSLY interested. I am going to rough estimate a set of doors is going to cost $1500, give or take $100 or so. Could be more, could be less(most likely not less though).

Here is a picture of the doors Seibon makes for the AE86 Corolla:

11-07-2006, 08:56 PM	#1 (permalink)
GReddySetGO Forced Fed @ 20psi Join Date: Feb 2005 Location: Pasadena, CA Posts: 456 Thanks: 1 Thanked 2 Times in 2 Posts iTrader Rating: (6/100% )	FEELER: Carbon fiber doors!! Is anyone seriously interested in getting some carbon fiber doors made for our cars? This is going to be a door shell, you reuse your stock door trim on the inside. I am still shopping aroudn to see who I will have make this for us. I would like to go Seibon because of their known quality and my personal experiences with them have been fantastic in both quality, fitment and service. They are reputable and have been around, which is why I would preffer them. However their costs are a little pricey in comparison to some other companies, and their buy-in for a custom part like this is 20 minimum orders. So all of this is going to be dependant on who is SERIOUSLY interested. I am going to rough estimate a set of doors is going to cost $1500, give or take $100 or so. Could be more, could be less(most likely not less though). Here is a picture of the doors Seibon makes for the AE86 Corolla: Last edited by GReddySetGO; 06-28-2007 at 02:59 PM..