|
The motor is in. I used my 5s tranny, beams pressureplate and flywheel (the 3sgte flywheel is noticeably heavier) and a 5s disk.
The car turns over (thats the easy part). The issue i'm having is that i'm not getting a check engine light when the ignition is turned on (meaning ecu is not turning on). I have the typical power leads hooked up, batt and b+. I'm thinking of three possible reasons for this issue.
-dead ecu
-additional power source that I didn't wire for
-wrong ecu pinouts (there are people who say that there is a map sensored beams ecu, though i've never seen it)
All major circuits seem to be live. Injectors, coilpack, idle control, ecu, etc....
So the ecu is getting power. This would be a first, but does this ecu have to be grounded to the chasis?
|