|
I have used and installed two of these. They had some metal chunks inside the collector that needed to be ground off. The one I installed on a friend's car rubbed a little against one of the mounting tabs on the head for the hotpipe brace. The hotpipe also *doesnt* fit wth this manifold, at least not with the stock bracket. I made a quick little bracket for my friend's car that I put in place of the stock bracket, that lifted the hotpipe up about 1/4"-3/8", and it fit after that. It also needed a turbohoses coupler because the Turbohoses couplers are thinner. The thicker stock coupler will touch the #4 runner where the coupler attaches from the compressor outlet to the hotpipe.
Other than that neither I nor he had no more problems.
|