Toyota MR2 Message Board - View Single Post - Shim under/Shimless buckets for MZ/VZ possible?

Jason.MZW20 · 02-26-2007, 04:49 AM

Lifter, Valve
- 13751-74040 (under bucket)
- Applications: 5SFNE

- 13751-74020 (over bucket)
- Applications: 4A/7AFE, 3S/5SFE (93+), 2JZGE/GTE, 1MZFE (excl. VVT-i), 3VZ/5VZFE, 2RZ/3RZFE, 2TZFE/FZE

Shim
- 13753-22xxx (depends on size)
- Applications: 5SFNE, 1/2/3UZFE

The part numbers between the two lifters are surprisingly close, and that usually means a revision of a similar part. I could test one on my 93+ 5SFE head or take my valve covers off and try on my 1MZ.

They're $12 a piece at Partznet x 24 = $288 plus shims.

02-26-2007, 04:49 AM	#1 (permalink)
Jason.MZW20 Torque Me!!! Join Date: Jul 2006 Location: Victorville, CA Posts: 884 Thanks: 12 Thanked 73 Times in 64 Posts Blog Entries: 6 iTrader Rating: (1/100% )	Shim under/Shimless buckets for MZ/VZ possible? Lifter, Valve - 13751-74040 (under bucket) - Applications: 5SFNE - 13751-74020 (over bucket) - Applications: 4A/7AFE, 3S/5SFE (93+), 2JZGE/GTE, 1MZFE (excl. VVT-i), 3VZ/5VZFE, 2RZ/3RZFE, 2TZFE/FZE Shim - 13753-22xxx (depends on size) - Applications: 5SFNE, 1/2/3UZFE The part numbers between the two lifters are surprisingly close, and that usually means a revision of a similar part. I could test one on my 93+ 5SFE head or take my valve covers off and try on my 1MZ. They're $12 a piece at Partznet x 24 = $288 plus shims. Last edited by Jason.MZW20; 02-26-2007 at 02:21 PM.