Toyota MR2 Message Board - View Single Post

Tearstone · 04-17-2007, 07:55 AM

I managed to find couplers from Forge Motorsport and finish up the SSAC intercooler install. Still I found this to be more cost effective than to throw down $300 on piping from KO racing.

SSAC Intercooler shroud from Mr. Bedell

Infamous SSAC Intercooler

Retained the use of the stock fan

Flippin' sweet

Blue couplers provided from Forge, the black couplers are from the stock configuration.

Using the stock hose required me to use part of one of the Forge coupler's trimmings right before the throttle body. Forge did not have any transitions this size when I went over there so this is the current fix.

04-17-2007, 07:55 AM	#49 (permalink)
Tearstone Booooost! Join Date: Jul 2006 Location: Orlando, FL Posts: 162 Thanks: 3 Thanked 2 Times in 2 Posts iTrader Rating: (1/100% )	I managed to find couplers from Forge Motorsport and finish up the SSAC intercooler install. Still I found this to be more cost effective than to throw down $300 on piping from KO racing. SSAC Intercooler shroud from Mr. Bedell Infamous SSAC Intercooler Retained the use of the stock fan Flippin' sweet Blue couplers provided from Forge, the black couplers are from the stock configuration. Using the stock hose required me to use part of one of the Forge coupler's trimmings right before the throttle body. Forge did not have any transitions this size when I went over there so this is the current fix.