|
Sounds like your COM1 port is either not a real serial port or there is some problem with it. The best thing to do for just playing with the software at this time would be to go to the Tools->Preferences panel on the entry screen and select OFF for AUTO CONNECT ON MAIN WINDOW. Press the "Save and Exit" button to save your preferences and then press the MAPS button. You may want to figure out which COM port your serial device is really connected to and then you can select that as the default COM port in the same preferences panel. Don't forget to set your preference back to ON for auto connect when you start doing real work on the Nemesis otherwise you will have to explicitly turn the communications to the unit on every time you enter the maps screen to do your tuning work.
|