Toyota MR2 Message Board - View Single Post

dblotii · 06-04-2007, 11:56 AM

I have a fairly hot 4age (small-port, mild cams, headers, CAI) that I am converting from AFM to MAF, using the Split-Second PSC1-009 piggy-back.

I started with a Ford V6 Hot-wire meter, because I had one. It turns out that it is too big. It never goes above 3.5 volts and I have to set all of my tuning Map to full rich just to get it to run. I need a smaller MAF. Anyon know of a good, readily available, Hot-wire MAF of the right size. It needs to be a 0-5 volts (not frequency) output.

Dave

06-04-2007, 11:56 AM	#1 (permalink)
dblotii No Skills Join Date: Jun 2007 Posts: 5 Thanks: 0 Thanked 0 Times in 0 Posts iTrader Rating: (0/0% )	AFM / MAF conversion, MK1 I have a fairly hot 4age (small-port, mild cams, headers, CAI) that I am converting from AFM to MAF, using the Split-Second PSC1-009 piggy-back. I started with a Ford V6 Hot-wire meter, because I had one. It turns out that it is too big. It never goes above 3.5 volts and I have to set all of my tuning Map to full rich just to get it to run. I need a smaller MAF. Anyon know of a good, readily available, Hot-wire MAF of the right size. It needs to be a 0-5 volts (not frequency) output. Dave