Toyota MR2 Message Board - View Single Post

Xi-Guy · 06-16-2007, 01:21 AM

Hi all,

I know MR2 turbo MKII came with low impedance side feeds, so while looking for a suitable injector for my JDM 1993, I came across these 800cc sards.

Funny thing was, in the description it said:

You are viewing a BRAND NEW set of 4 X 800cc Fuel Injectors for the 3S-GTE engine found in the SW20 MR2
The injectors are low impedance and will need the use of the dropping resistor if used on the 3S-GTE engines originally equipped with high imedance injectors (non-vvti).

I interpret it as non-vvti needs high impedance.

I didnt think mr2s had vvti. Is it possible that my JDM has vvti? I dont think so. Anyhow here is the link,

https://www.rhdjapan.com/home/produc...product_id=516

Anyone care to shed some light on this?

Thanks all,

Xi-guy

06-16-2007, 01:21 AM	#1 (permalink)
Xi-Guy No Skills Join Date: Jun 2007 Posts: 22 Thanks: 0 Thanked 0 Times in 0 Posts iTrader Rating: (0/0% )	JDM injectors help Hi all, I know MR2 turbo MKII came with low impedance side feeds, so while looking for a suitable injector for my JDM 1993, I came across these 800cc sards. Funny thing was, in the description it said: You are viewing a BRAND NEW set of 4 X 800cc Fuel Injectors for the 3S-GTE engine found in the SW20 MR2 The injectors are low impedance and will need the use of the dropping resistor if used on the 3S-GTE engines originally equipped with high imedance injectors (non-vvti). I interpret it as non-vvti needs high impedance. I didnt think mr2s had vvti. Is it possible that my JDM has vvti? I dont think so. Anyhow here is the link, https://www.rhdjapan.com/home/produc...product_id=516 Anyone care to shed some light on this? Thanks all, Xi-guy Last edited by Xi-Guy; 06-16-2007 at 02:01 AM. Reason: copyright issue