![]() |
|
|
|||||||
| Register | Top Posters | Donate | Projects | Blogs | FAQ | Members List | Calendar | Search | Today's Posts | Mark Forums Read |
| 20v Swaps Everything you need to know about putting the 20 valve 4A-GE in your AW11 MK1 MR2. |
![]() |
|
|
LinkBack | Thread Tools | Display Modes |
|
|
#1 (permalink) |
|
Can you say grippy?
Join Date: Aug 2008
Location: New Zealand
Posts: 1,513
Thanks: 12
Thanked 99 Times in 83 Posts
My Google Map iTrader Rating: (0/0% ) |
Another swap on my mind
Once again I can't leave things alone, I got a 20V for $100 minus the harness, ecu, exhaust and flywheel. I got another one for $50 with the headers and the flywheel with a good clutch. Brought an auto toyota levin silvertop harness for $50 and pulled together a bunch of temp sensors etc from my parts bin now I have a damn near complete 20V that I want to swap.
A couple of issues though, from what I've read an auto loom really needs an auto ecu. The plugs are different I believe, Now here is the first question. Can I modify the plugs to fit a manual ecu if I have to? I can't remember if one is a 2 plug and the other a 3 plug. And if not are the fuel and ignition maps the same so I can just bridge the park terminals so it starts and run it that way, it is how I did my 4agze when I built that and it works fine. Also the "uncut" loom was uncut for the most part but for some reason they cut off the alternator plug and left the wires hanging. I have an alternator with the smaller later style plug (the one that's not round like the old bluetop one). I will try to get some pics up but I need to wire that back up so need to get a pic of what wire colour goes where. I am noob with the 20v swap because I don't deal with them that often but now I have one I want to swap out my old cars 16v bluetop that has done 2 seasons racing. I will pull it together just depends on how much swapping of bits I need to do. Until I sort out what I'm doing I'm not going to hack up the harness in case I find out I need a manual one. |
|
|
|
|
|
#2 (permalink) |
|
Can you say grippy?
Join Date: Aug 2008
Location: New Zealand
Posts: 1,513
Thanks: 12
Thanked 99 Times in 83 Posts
My Google Map iTrader Rating: (0/0% ) |
The engine was also missing a tps for whatever reason and I am looking for another one. I think I remember that one off some other model of car works, was it a camry 3L? idk. Finding a silvertop tps is tricky because nobody wants to sell them separate from the throttle bodies because they get more that way. I'll ask my friend to see if he needs/has his from getting the TB off another engine.
|
|
|
|
|
|
#3 (permalink) |
|
Cage Fighter
Join Date: Dec 2006
Location: tulsa OK
Posts: 125
Thanks: 3
Thanked 1 Time in 1 Post
iTrader Rating: (2/100% ) |
you need the tps from an 94-96 supra tt, they can be had new for as little as 75 shipped.
|
|
|
|
![]() |
| Thread Tools | |
| Display Modes | |
|
|