![]() |
|
|
|||||||
| 20v Swaps Everything you need to know about putting the 20 valve 4A-GE in your AW11 MK1 MR2. |
![]() |
|
|
LinkBack | Thread Tools | Display Modes |
|
|
#1 (permalink) |
|
No Skills
Join Date: Feb 2009
Location: Holland
Posts: 32
Thanks: 1
Thanked 5 Times in 2 Posts
iTrader Rating: (0/0% ) |
AW11 exchanger/intercooler question.
So far I know my 2e gen Silvertop originally do not have a inter cooler ore alike.
My aw11 and its original 16V did had a system like that. logical I did not re connect it and left it out during the swap. Is it possible to re-connect that system on to the 20V ? I know I have to replace the oil pan/cartridge and filter manifold with the one of the old 16V. But by extending the oil circuit that way do I not influence the oil pressure ? Is it a good thing to do anyway ? oil can get pretty hot in a 20V but is that not fore a reason ? |
|
|
|
|
|
#2 (permalink) |
|
Cage Fighter
Join Date: Nov 2008
Location: west chester PA
Posts: 415
Thanks: 4
Thanked 5 Times in 5 Posts
iTrader Rating: (2/100% ) |
intercooler or oil cooler? i thnk you have terms confused. there is an oil cooler, which was on the 16v motor, it links the oil system to the cooling system to cool the oil.
an intercooler is on the supercharged and any ones that people turbo...that cools the intake charge as it flows through the system |
|
|
|
![]() |
| Thread Tools | |
| Display Modes | |
|
|