Toyota MR2 Message Board - View Single Post - PN-Req: Hose from Slave Clutch Cylinder

biorchang · 09-16-2007, 05:25 PM

Hi all.

I have air getting into the clutch lines and think I have isolated to loose connections on the hose that goes from the slave clutch cylinder to the hard line. The hose is clamped into the screw fittings on either side. Wiggle just a nudge and bubbles between the hose and the fitting...

Anybody know the part #?

94 Turbo.

09-16-2007, 05:25 PM	#1 (permalink)
biorchang 94 Turbo Join Date: Mar 2006 Location: Austin, TX Posts: 1,030 Thanks: 16 Thanked 52 Times in 51 Posts iTrader Rating: (9/100% )	PN-Req: Hose from Slave Clutch Cylinder Hi all. I have air getting into the clutch lines and think I have isolated to loose connections on the hose that goes from the slave clutch cylinder to the hard line. The hose is clamped into the screw fittings on either side. Wiggle just a nudge and bubbles between the hose and the fitting... Anybody know the part #? 94 Turbo.