..There is a guy on here who's the US importer for Rogue. I can't remember his name but if you E-Mail Patrick Mortell at Rogue I'm sure he can help identify.
....anyway.....
Quote:
|
my passenger side skirt is half missing so i don't care about them for looks currently.
|
The subject of this came up on imoc and for the cash of the Rogue ones -we reckoned you can't do much better. HOWEVER, with half a side-skirt missing, I reckon it would be easy to:
Buy a sheet of polystyrene sheet -something like foolscap / A4 size for a buck from a model supplier, Something say 2mm thick (can't remember how many thou that is). And get nifty with a craft knife and heat gun or hair dryer and you could shape the sheet into something fairly similar over your knee or something round. Then then bolt or bond it in place.
...not sure how effective they are as mine are still off the car (problems fitting them nicely to aftermarket skirt / engine pod curves) but from the looks of them -and my boss has a similar one (stock) on his Porche Boxter, they must channel just that bit more air in.
Quote:
|
if your worried about temps, you should see the custom intake block off plate im going to fab up, keeps hot engine air seperated from the filter, very similar idea that K&N makes, just 1/4 the cost
|
Got my interest on that one mate if it is what I think it is. I'm thinking of doing something similar on mine. If you've a pattern I'd be happy to chuck a few bucks your way for that -or let me know if you'd supply one to the UK.
Cheers,
Richard