Toyota MR2 Message Board - View Single Post

scooterman · 12-28-2007, 05:23 PM

its 11mm unthreaded, the 5sfe regulator is a press in with an o-ring and 2 bolts to hold it down.

it easy just to tap the 11mm hole to 12 x 1.25, then you can put in a fitting

before

after

12-28-2007, 05:23 PM	#7 (permalink)
scooterman megasquirted 5sfte Join Date: Dec 2007 Location: Northampton, MA Posts: 147 Thanks: 1 Thanked 17 Times in 10 Posts iTrader Rating: (3/100% )	its 11mm unthreaded, the 5sfe regulator is a press in with an o-ring and 2 bolts to hold it down. it easy just to tap the 11mm hole to 12 x 1.25, then you can put in a fitting before after