Toyota MR2 Message Board - View Single Post

senn · 01-31-2008, 02:33 AM

While i was trying to do the rear pads i noticed i couldn't push the piston back into the caliper (yes even with the bleed nozzle open) Is there an adjustment screw or similar on the calipers for the park brake that might hold the piston out? I've never really dealt with calipers that have the p-brake integrated like this usually the systems i've worked with have a seperate drum system for park...

It's a December 87 car if that makes any difference

01-31-2008, 02:33 AM	#1 (permalink)
senn AW11 Newbie Join Date: Feb 2007 Location: Australia Posts: 96 Thanks: 8 Thanked 1 Time in 1 Post iTrader Rating: (0/0% )	Rear Caliper Handbrake adjustment? While i was trying to do the rear pads i noticed i couldn't push the piston back into the caliper (yes even with the bleed nozzle open) Is there an adjustment screw or similar on the calipers for the park brake that might hold the piston out? I've never really dealt with calipers that have the p-brake integrated like this usually the systems i've worked with have a seperate drum system for park... It's a December 87 car if that makes any difference