Quote:
Originally Posted by thejigalo
i just bought one..... 91'turbo temp gage sending unit at advance auto, it was like $15.00, they had to order it, but that only took a day. autozone should be able to get it also.
now as far as gettin the old one out..........you will probably have to remove the housing.. try heating up the alluminum housing with a propane torch. and try to turn it out with a damaged screw/bolt remover. you can get those at sears or most autoparts stores.(autozone has loan a tool program)
make sure to clean it up really good before you put it all back together.
be carefull as not to damage the threads on the housing....
mine was pretty tough to get out, the alluminum over time seizes to the threads on the sensor, just take your time.
|
I'm not very handy. This sounds a lot more difficult than I want it to be.
There is tubes and stuff in that area. Is it possible that I will melt something?