Toyota MR2 Message Board - View Single Post - New intake manifold option presented by ATS

1fastsol · 04-09-2008, 03:44 PM

At this point the plenum is cut and welded into place.

Here are a few pictures of a manifold being test fit on a customer’s car. This particular manifold is a center feed with a 70mm Wilson manifolds throttle body. Notice all the vacuum ports are on the bottom of the manifold for a cleaner look.

Look more Pics! Here is a side feed setup.

04-09-2008, 03:44 PM	#2 (permalink)
1fastsol No Skills Join Date: Feb 2006 Posts: 39 Thanks: 0 Thanked 0 Times in 0 Posts iTrader Rating: (0/0% )	At this point the plenum is cut and welded into place. Here are a few pictures of a manifold being test fit on a customer’s car. This particular manifold is a center feed with a 70mm Wilson manifolds throttle body. Notice all the vacuum ports are on the bottom of the manifold for a cleaner look. Look more Pics! Here is a side feed setup.