|
It's super easy. You will want to mark the position of the end of each wiper blade before you start by placing a piece of masking tape on the glass where the outer end sits (with the wipers in the down position). Open the frunk lid, then pry the little covers at the bottom end of the arms up, exposing the nuts that hold the arms to the shafts. Loosen those nuts but do not remove them all the way, then pull the wipers up off the glas and wiggle the arms until they come loose from the shafts. Once they are loose you can remove the nuts and pull the arms off entirely.
Easy stuff, just use common sense and take care not to damage the paint or glass!
|