Quote:
Originally Posted by Paul Woods
hi brad,great thread,however the above is totally wrong,a 3vz return style rail will not work on a 1mz,we nearly had an engine bay fire due to reading this on the old board and giving it a try.The rail fits,but it cranks the injectors over at an angle and fuel squirts out everywhere,theres a good 5-10mm difference in the injector hole spacing in the rail between 1mz and 3vz.Please guys nobody do this mod,it 100% doesnt work and we very nearly lost a car.... for a return style on a 1mz go tap your rails out which is what ive done,doesnt cost much.
|
Fixed. This is a very old thread, I just dug it up to make a few corrections. (look at the initial posting date.)