Toyota MR2 Message Board - View Single Post

DarylP · 06-07-2008, 05:47 PM

Papo's right Most of what is involved in turboing our mk1's is making or sourcing the parts needed to get the engine to run. Best thing to start with is a 4agze engine or short block. That would give you alot stronger base on which to build on. Than select what type of turbo you want to use. Than source or make a exhaust to mount your turbo on. Will need some form of intercooling, piping, another form of engine control, bigger injectors, cams if you want to try anything other than stock but stock cams seem to work fine, turbo oiling and draining, blow off and boost control valves. And other stuff.

How much Torque/power are you going to try for?

06-07-2008, 05:47 PM	#3 (permalink)
DarylP Cage Fighter Join Date: Aug 2007 Location: kennewick,wa Posts: 111 Thanks: 12 Thanked 4 Times in 4 Posts iTrader Rating: (0/0% )	Papo's right Most of what is involved in turboing our mk1's is making or sourcing the parts needed to get the engine to run. Best thing to start with is a 4agze engine or short block. That would give you alot stronger base on which to build on. Than select what type of turbo you want to use. Than source or make a exhaust to mount your turbo on. Will need some form of intercooling, piping, another form of engine control, bigger injectors, cams if you want to try anything other than stock but stock cams seem to work fine, turbo oiling and draining, blow off and boost control valves. And other stuff. How much Torque/power are you going to try for? Last edited by DarylP; 06-07-2008 at 06:01 PM..