nice
that involves some serious modifications, as in cutting out the battery tray, relocating the battery to the front trunk .. and going with a different way to mount the intercooler on the SC cars.
I'm sure there will be interest in this setup. Some folks have moved the gas filler cap to the top, on the panel left of the engine lid, behind the pillar since it gets in the way of a symmetrical vent on both sides.
If i were to cut up my car I'd cut out the whole piece from a passenger side, make my own vent that's identical for both sides (which will bolt on the same way the stock piece does on the pass side), while using the rubber pieces and water collection, and route a filtered pipe into that.
there are many donors right now at junk yards for stock pieces to be cut out and fitted. it would make for a very clean setup and people can swap out different scoops to their liking, rather than cutting metal every time a different scoop is desired