Toyota MR2 Message Board - View Single Post

BRoman · 07-01-2008, 02:55 PM

Hey Aaron,

The speedo subassembly on the trans of my 89 SC needs replacing...and the replacement adapter (elbow) from the local Toyota dealer is not the same size as the old one!

The old adapter fits easily in both the new sleeve and the old sleeve...the new adapter is just a little too big for both. This is as far as it goes without serious pressure: http://i294.photobucket.com/albums/m...rOldSleeve.jpg

The sleeve is PN 33404-17010; adapter is PN 83770-17010. Should I be using other part number(s)? And if so, do you sell it?

Thanks in advance for any parts or info you can provide. You helped me out with some TRD filters a few years ago but I've been out of the hobby for awhile.

-Bryce

07-01-2008, 02:55 PM	#1 (permalink)
BRoman walking amok Join Date: Jun 2008 Location: TX Posts: 14 Thanks: 0 Thanked 0 Times in 0 Posts iTrader Rating: (0/0% )	What parts do I need? Hey Aaron, The speedo subassembly on the trans of my 89 SC needs replacing...and the replacement adapter (elbow) from the local Toyota dealer is not the same size as the old one! The old adapter fits easily in both the new sleeve and the old sleeve...the new adapter is just a little too big for both. This is as far as it goes without serious pressure: http://i294.photobucket.com/albums/m...rOldSleeve.jpg The sleeve is PN 33404-17010; adapter is PN 83770-17010. Should I be using other part number(s)? And if so, do you sell it? Thanks in advance for any parts or info you can provide. You helped me out with some TRD filters a few years ago but I've been out of the hobby for awhile. -Bryce