|
Go ahead and install the cams now. Use the adjustable gears to set the cams to 0. Once you find zero then retard the exhaust 6 degrees. It may not be 6 on the cam gear, it might be 3 it might be 9 or anywhere in between, it all depends on what you had to set them to to get zero (get it?).
Start it up and see if it will idle OK. Even without the rom tune it should idle. You will probably need to loosen the flat tip screw on top of the throttle body to raise the idle some. If it's just too rough then you will need to retard the exhaust cam LESS.
Then buy the TD06 kit with the rom tune and I'll send you what you need.
Aaron
|