hi,great Tutorial i will try that soon.
ok i have some questions if you dont mind :-) you can answer beneath the questions if you quote.
1.what exactly is "resin" (iam from germany)
2.After the resin starts to dry and you want to lay over your piece of carbon cloth..do you use Gloves?Or do the stick like glue?
3.How hard do you press?Must the resin come through the cloth?
4.when u brush the Kleerkote on the piece do you poke the bubbles out with forward motions against the piece or do you fade out from left to right and invert and cross forms?like painting?
5.how much do you apply before you do the step with the flood coat?i mean do you put on just enough to fill the uneven structure out?
6.flood coat : how do you let it flow down that it becomes same at all surface?do i need to use a brush here?U do this so often that the surface becomes smooth?how an i prevent wasting lots of the resin?
7.what is sanding , wetsanding process and what is buffing?
ehm thats it
