Thread: 20V MK1 Engine Swap Still having issues. Please help..
View Single Post
Old 08-06-2008, 01:08 AM   #24 (permalink)
tjmr2
Cage Fighter
 
Join Date: Jan 2008
Location: Colorado
Posts: 409
Thanks: 0
Thanked 62 Times in 59 Posts

My Google Map



I don't know what you hooked the fuel return line up to but it doesn't sound good. You may have hydraulically locked up the engine (filled a cylinder with fuel). Pull your spark plugs and make sure none of them are full of gasoline. Then make sure the engine will turn over BY HAND, do not attempt to start with the starter.

The fuel return line leaves the pressure regulator (short rubber hose to steel line) on the passenger side of the fuel manifold and passes under the throttle bodies to the drivers side (end of steel line) where you have to run a hose from the steel line to your fuel return line on the firewall.

Hope this helps.
tjmr2 is offline   Reply With Quote
 
Page generated in 0.13019 seconds with 16 queries