|
ok . put in a new ecu
mine had yellow sockets on the bottom of it .. both of his have grey sockets
my harness has grey plugs, and his has yellow plugs
anyone know why this is ???
also .. now it will start and try to idle / stumble around 400 rpm then cut off
im stumped .. checked over all the sensors and wiring .. all seems fine, throttle body is clean, checked timing and its spot on (cams / tdc lined up .. and distributor pointed torwards #1)
when I do start it .. if i press the gas pedal, it will rev to 3000 rpm and hold there and slowly work its way back down to 400 then cut off .. if i press the gas pedal again whilst its at 3000 rpm, it will rev REALLY fast up to 6000 rpm .. but wont idle
anyone know why its doing this ... I can mess with the gas pedal (barely press it) and it will idle really roughly (shakes alot) around 1000rpm
|