|
Don't know if it works on tints but with decals and numbers I put on my racecars you can use soapy water on the surface so the stick on doesn't stick then you slide it around and into place and leave to dry (may leave a haze or streaks though being see through). Also have a rubber scraper handy, I brought one off an auction site for $2, its like a flexable thing that resembles a comb crossed with a paint scraper and you use it to smooth and push out bubbles by scraping/pulling it across the surface with considerable downpressure with the back edge trailing so it doesn't punch a hole. Used it on my RX7 and it worked a treat. I'm no expert though and my experiance is based on decals not tints.
|