|
hmm, I have a 91 so I'm not 100% sure that they are exactly the same. What I did was unbolt the strut(2 bolts), unbolt one rear control arm, and unbolt the hub from the bottom ball joint(2 bolts). Plus just unbolted the whole brake caliper bracket from the hub and undo the axle nut. From there all I had on mine was the one snap ring, and like a dust cover over that. The bearing only comes out and goes in from the inside of the hub. So I'm not sure if yours could have a couple extra parts or not, since yours is a 93 with slightly different suspension comapred to my 91-92 style.
|