Toyota MR2 Message Board - View Single Post - swapping a 4agze's supercharger on a n/a 4age?feasible...?

ivanv06 · 10-11-2008, 08:32 AM

no it will not blow the motor, but you'll need EVERYTHING from the 4agze engine. ECU, AFM, wiring loom, injectors, inlet manifold and associated pipe work, distributor, fuel rail, fuel lines from the fuel filter to fuel rail, s/c mount, s/c alt mount... etc. etc... you get the picture.

or otherwise custom mount the s/c ~3" lower under the na inlet manifold (move the alt so need gze alt mount etc.) make up your pipe work, relocate TB between AFM and s/c inlet, get a aftermarket engine management, good i/c and get it tuned. <<< this is how i would do it if going through it all again.
-feral4mr2

my apologies im a newb, took me alil bit too find this information .

10-11-2008, 08:32 AM	#2 (permalink)
ivanv06 No Skills Join Date: Oct 2008 Posts: 14 Thanks: 2 Thanked 0 Times in 0 Posts iTrader Rating: (0/0% )	no it will not blow the motor, but you'll need EVERYTHING from the 4agze engine. ECU, AFM, wiring loom, injectors, inlet manifold and associated pipe work, distributor, fuel rail, fuel lines from the fuel filter to fuel rail, s/c mount, s/c alt mount... etc. etc... you get the picture. or otherwise custom mount the s/c ~3" lower under the na inlet manifold (move the alt so need gze alt mount etc.) make up your pipe work, relocate TB between AFM and s/c inlet, get a aftermarket engine management, good i/c and get it tuned. <<< this is how i would do it if going through it all again. -feral4mr2 my apologies im a newb, took me alil bit too find this information . Last edited by ivanv06; 10-11-2008 at 08:49 AM.. Reason: i found the information reading other posts