Quote:
Originally Posted by MR2 Drifter
Did you need to use a AFM (Air Fuel Module i think?) when installing the engine?
|
Yes. The gen2 3SGTE uses an AFM (Air Flow Meter). You'll want to make sure your swap includes this part with the complete engine harness. To my knowledge the only way to bypass it is by using a stand-alone ECU.
You will need everything listed on the attached picture (I did not make this one) with the exception of:
- Airbox resonator
- Airbox (If using an aftermarket air filter)
- Engine bay temp sensor (Comes on turbo body harness, but not required when manually wiring your intercooler fan)
- Intercooler fan & piping (If using aftermarket, IE SPAL & Greddy)
- Fuel pump relay & resistor pack
- EGR stuff (None of this comes with Japanese motors)
And then of course all non-necessity items such as cruise control or AC.