Quote:
Originally Posted by Basement Digital
Glad it runs!
I haven't been on in a while so I'm not sure if you have these problems sorted out yet or not. I'll have to dive into my service manual before I can start speculating. Maybe I will if I get a chance after work.
|
Okay so figured everything out. Car is running like a top. A couple things in the tutorial caused a few problems. One problem I had was on the starter relay, In your tutorial you pull from the white cable for the sta pin. I couldn't get it to send the right signal unless i pulled it from the red cable.
Another problem I had which was causing my car to die after seconds of running was the fc pin on the ecu. In your tutorial it makes it seem like on JDM ecus the fc is on plug A. In reality on the turbo 91-92 ecus jdm or usdm its on plug C.
Other than that this swap how to is the greatest write up ever. I don' think I could have done this swap without you. I haven't been able to drive it yet because I haven't put on the subframe or suspension but it runs like a top. I'm not throwing any codes now, If you ever come to utah give me a call and i will buy you dinner lol.