Quote:
Originally Posted by MANDALAY
Thanks buddy !
One stupid question are the standard units adjustable in relation to gap ?
I dont recall the mechanic measuring them but them again l wasnt there the whole time of building.
|
Yeah the standard 'platinum' are adjustable... or you can check p#'s and see if different pre-gapped ones are avail. If you knock the -11 off the end of the p# you get .8mm gap ones.
Gapping the iridiums is pretty much a no-no, most of the fine tips will break away if you try and get a feeler gauge in there. They're really sensitive to physical contact. If your really careful it can be done, but expect to break one or two...
Andrew