|
I would avoid getting a clip at all costs. At least if it's going to cost 5k+.
This swap can be done with either a celica or caldina motor, and a few additional parts:
-gen3+ bpipe
-gen3 mr2 wateroutlet housing
-aftermarket 1mzfe intake.
The $5000 mr2 rear clip was the main reason I started making harnesses for the beams. At $5000, this swap remains rare and exclusive. At 1000 beams mr2's produced, there just aren't enough to make this a common swap. With an easy/cheap path to swap the more common beams motors, people start using it instead of 3sgte swaps. It may get cheap enough to where people opt for this when their 5sfe goes bad.
Even with the beams clip, you're still not free from wiring. With my harness you are. So in a way, it's easier not to use a clip. Just have to order the right parts up front.
|