Toyota MR2 Message Board - View Single Post

Weasy2k · 11-25-2008, 03:01 AM

Hey Everyone,
I am looking to unload some of my inventory here so i am having a little blow out sale. Below are the details:

If you are interested in any of the below products please let me know here or via PM.

Also i can even work out a better deal if you buy more then one product.

Thank you!

High-Flo Valves:
All Sea2SkyTuning valves feature Manley Performance "Pro-Flo" design which cuts the stem of the valves back near the face to improve flow as much as 125% at .100" lift or to a max of 40% at full lift!

With this design you can get the flow rate of a 1mm OS valve minus the costly process of fitting a 1mm OS valve into the engine!

More information can be found at: High Flo Valves

Applications:
3/1mz-fe: Stock length or assorted valve tip lengths available. [.025”, .040”, .090”]
5/3vz-fe: Stock length or assorted valve tip lengths available. [.025”, .040”, .090”]

List Price: $475 a set
Blow-Out Price: $325 per set

ALL VALVES ABOVE ARE IN STOCK!! LIMITED QUANTITIES AVAILABLE!

Stage 1 Valve Springs:
Rated at 80lbs of pressure these springs will be able to handle higher boost and rpm levels vs the stock softer springs.

1 set of 1mz valve springs left! I may be able to get more at the prices listed below but only if there is demand for it.

Applications:
1/3mz-fe: 1 set
3/5vz-fe: SOLD OUT

List $140 Blow out $100 a set!

Headgaskets:
Lots of shipping issues have messed up my timing on getting 3vz-fe head gaskets, its still in the loop but I don’t know when ill get this done and setup. So for now only 5vz-fe (and other 4cyl guys) can get the head gaskets.

I have to get some updated pricing in regards to the HG as I do not stock them so please email me and ill get you some pricing.
Arias V6 Piston Sets:
Custom made for Sea2Sky Tuning by Arias, these pistons are built to handle almost anything you can throw at them (Turbo, S/C, NO2). All motor users should contact us about special light weight piston sets.

More info can be found HERE

I currently have quite a few 5vz-fe and 3vz-fe piston sets in stock and have DRASTICALLY reduced my price below cost!

Applications:
In stock I have:
5vz-fe STOCK CR [9.5:1] Oversized Pistons:
3vz-fe STOCK CR Stock sized pistons:

Regular Price: $850usd

Current Price: $500usd SHIPPED

Pauter V6 Rods:
I have recently sold out of these but if I can get 3 or more people interested in these I can get them reordered. In order for me to get any deal I have to have 3 ordered at the same time.
These are for the 3vz-fe and 5vz-fe only.

$1050 per set if I can get 3
$950 per set if I can get 9

11-25-2008, 03:01 AM	#1 (permalink)
Weasy2k 3.4L 10K RPM In the works Join Date: Mar 2005 Location: Vancouver, BC Posts: 8,895 Thanks: 34 Thanked 80 Times in 66 Posts iTrader Rating: (9/100% )	Sea2Sky Tuning Year END Blow out sale! Hey Everyone, I am looking to unload some of my inventory here so i am having a little blow out sale. Below are the details: If you are interested in any of the below products please let me know here or via PM. Also i can even work out a better deal if you buy more then one product. Thank you! High-Flo Valves: All Sea2SkyTuning valves feature Manley Performance "Pro-Flo" design which cuts the stem of the valves back near the face to improve flow as much as 125% at .100" lift or to a max of 40% at full lift! With this design you can get the flow rate of a 1mm OS valve minus the costly process of fitting a 1mm OS valve into the engine! More information can be found at: High Flo Valves Applications: 3/1mz-fe: Stock length or assorted valve tip lengths available. [.025”, .040”, .090”] 5/3vz-fe: Stock length or assorted valve tip lengths available. [.025”, .040”, .090”] List Price: $475 a set Blow-Out Price: $325 per set ALL VALVES ABOVE ARE IN STOCK!! LIMITED QUANTITIES AVAILABLE! Stage 1 Valve Springs: Rated at 80lbs of pressure these springs will be able to handle higher boost and rpm levels vs the stock softer springs. 1 set of 1mz valve springs left! I may be able to get more at the prices listed below but only if there is demand for it. Applications: 1/3mz-fe: 1 set 3/5vz-fe: SOLD OUT List $140 Blow out $100 a set! Headgaskets: Lots of shipping issues have messed up my timing on getting 3vz-fe head gaskets, its still in the loop but I don’t know when ill get this done and setup. So for now only 5vz-fe (and other 4cyl guys) can get the head gaskets. I have to get some updated pricing in regards to the HG as I do not stock them so please email me and ill get you some pricing. Arias V6 Piston Sets: Custom made for Sea2Sky Tuning by Arias, these pistons are built to handle almost anything you can throw at them (Turbo, S/C, NO2). All motor users should contact us about special light weight piston sets. More info can be found HERE I currently have quite a few 5vz-fe and 3vz-fe piston sets in stock and have DRASTICALLY reduced my price below cost! Applications: In stock I have: 5vz-fe STOCK CR [9.5:1] Oversized Pistons: 3vz-fe STOCK CR Stock sized pistons: Regular Price: $850usd Current Price: $500usd SHIPPED Pauter V6 Rods: I have recently sold out of these but if I can get 3 or more people interested in these I can get them reordered. In order for me to get any deal I have to have 3 ordered at the same time. These are for the 3vz-fe and 5vz-fe only. $1050 per set if I can get 3 $950 per set if I can get 9 __________________ -Johnny @ Sea2Sky Tuning - www.sea2skytuning.com http://www.mr2.com/forums/sea2sky-tu...-out-sale.html Last edited by Weasy2k; 11-25-2008 at 03:06 AM.