Quote:
Originally Posted by MANDALAY
My front mount pre-radiator should be coming in next 2 weeks . Once its in its time to install that.With the front bumper off and the car jacked up i want to put my WALBRO in 
Question if l put the pump in given its higher flow will it cause a problem to run the car in its OEM set up ?
Bosch water pump is going to be placed inside the bumper like the water bottle for the windscreen is but on the other side
Also 2nd question while the car is up l want to run solid water pipes from the front to the back for the Intercooler set up with only short hoses connecting the Precooler and the A/W unit.
Does anyone see a problem me using Aluminium pipe ? Ill be making brackets so as to use the factory bolts that holds the AC pipe work. |
No problems at all....sort of....I would mount an adjustable FPR with a gauge to monitor the situation for a while, *especially* while tuning, while figuring out what runs proper on your duty cycles. I will assume that you will not pass the emissions test with something from Aeromotive hanging out near your OEM fuel rail....