|
I'm heading down this track and what you need is another computer (stand alone cause there is no plug n play computer) For boost control a good blow off valve will do as it will vent excess gas you just got to buy the right spring for it.
There are companies that make manifolds but they can be pricey. you could make one or have one made. My friend made one for a Honda engine and it worked well just using tight mandrel bends and heavy exhaust tube. you don't need an intercooler they just help make more horsepower by cooling the compressed air. At 3 - 6psi they are not a huge necessity.
As for plumbing just use large tube and silicon bends to come back to the tvis. Not sure if removing the tvis butterflies is a good idea or not (something I've been thinking about with my build), all depends on when the boost comes in but with low boost like that it should start to pull from about 3k and top out real quick.
|