Quote:
Originally Posted by mr220v
I had a little go around with him on the other board while promoting my beams harness service.
He said that I could only get a beams ecu from Japan for $2500+, and that I couldn't possibly use an AT ecu with a manual tranny and that it would cause all sorts of problems if I tried.
Recently Servin bought a Caldina AT ecu for under $200, and it was proven to run with no check engine light and no issue whatsoever. Guess he didn't like the idea of people potentially doing this swap for less than $2000.
Needless to say, I will never do business with the guy, and recommend people avoid him at all cost.
|
gayest thing ever, I have done that to so many AT ECU's over here now...5&3SFE ECU's in mr2/camry/celica/RAV4, just hit NSW & PSW to ground and everything *should* be sexy