Thread: 20V MK1 Engine Swap if doing a 20v swap
View Single Post
Old 12-11-2008, 06:05 PM   #4 (permalink)
mr220v
Beams Owners Group
 
mr220v's Avatar
 
Join Date: Mar 2006
Posts: 2,529
Thanks: 13
Thanked 176 Times in 147 Posts





You need:

-ST engine
-BT ecu
-Toyota NA map sensor and airtemp sensor
-20 harness of some kind (cut or uncut doesn't matter)
-Coil and igniter (93 4runner v6 if you buy seperate)
-4wire o2

$850 is a pretty good price for an ST swap set. You can sell the 20v ecu off for $100-$130. You can sell the afm off as well. Sometimes these go for $100, though you can get a 91 camry 4cyl 3sfe afm for $15 as a substitute. Some people don't know this though. Between the afm and the ecu, you could probably buy a blacktop ecu. Toyota NA map sensors are super cheap. I could give you an airtemp sensor if you wanted.

Buying local is always the best idea. No shipping charges, and you get to look under the oil cap before you buy.

BTW, a 50000 mile jdm motor is supposed to be silver, or slightly golden internally. Make sure you're not getting the black sludge box.
mr220v is offline   Reply With Quote
 
Page generated in 0.31817 seconds with 16 queries