Toyota MR2 Message Board - View Single Post

surfer8 · 12-30-2008, 10:12 PM

I'm still in the process of doing springs and struts. Gland nuts are serious so I came up with these. One is for the gland nut and the other is used to hold the upper spring perch. I cut a 32 inch handle for the wrenches. FYI, Toyota and KYB use different size gland nuts. I cut a wrench for both.

Here's a closeup of the business ends

Thought you would enjoy a picture of my high dollar powdercoat booth. Note that I went with a 24 inch part hanger (that's what my neighbor was throwing away).

Here's what I've got so far. Hope to finish them by Saturday

12-30-2008, 10:12 PM	#1 (permalink)
surfer8 tenacity Join Date: Mar 2008 Location: SE Indiana Posts: 164 Thanks: 10 Thanked 4 Times in 4 Posts iTrader Rating: (4/100% )	DIY tools I'm still in the process of doing springs and struts. Gland nuts are serious so I came up with these. One is for the gland nut and the other is used to hold the upper spring perch. I cut a 32 inch handle for the wrenches. FYI, Toyota and KYB use different size gland nuts. I cut a wrench for both. Here's a closeup of the business ends Thought you would enjoy a picture of my high dollar powdercoat booth. Note that I went with a 24 inch part hanger (that's what my neighbor was throwing away). Here's what I've got so far. Hope to finish them by Saturday