Toyota MR2 Message Board - View Single Post

Kevin mr2 1985 · 01-07-2009, 10:26 PM

okay i have a few vacuum hose issues and some other things and here they are:

first where do these vacuum hoses go i have no idea and i need to know PS these are by the fuel rail.

next are all these hoses where do they all go?

okay now where on those hoese do i put a mechanical boost gauge into?

now this bracket is off of the firewall between the driver and the engine bay. i need to know where these hoses go? i do not have cruise control or ac any more. if that helps.

okay finally i need some ideas for how to make a hood scoop... before u jump to conclusion this is what i got going on. i have taken a engine lid and cut a 10" diameter hole and put a push 10" spal fan in the hole pointing out of the engine bay. for the obvious reason of cooling the hole thing now all i need is to build a scoop or put a scoop on top of it any ideas? key part will be dealing with the kink in the hood... yes the whole goes over that kink so here is pic of the set up now any ideas for hood scoop about 2-3" tall and 12-14" wide and mabey 14-16" long?

Last but not least the throttle cable problem... the bracket that holds the throttle cable is to short it doest hold the cable tight any ideas?

Thanks for all the help and my thought is if i get al this info i need ill be running by febuary.

01-07-2009, 10:26 PM	#1 (permalink)
Kevin mr2 1985 it started! yes! Join Date: Mar 2008 Location: Washington Posts: 435 Thanks: 0 Thanked 2 Times in 2 Posts iTrader Rating: (0/0% )	4agze issues!!! okay i have a few vacuum hose issues and some other things and here they are: first where do these vacuum hoses go i have no idea and i need to know PS these are by the fuel rail. next are all these hoses where do they all go? okay now where on those hoese do i put a mechanical boost gauge into? now this bracket is off of the firewall between the driver and the engine bay. i need to know where these hoses go? i do not have cruise control or ac any more. if that helps. okay finally i need some ideas for how to make a hood scoop... before u jump to conclusion this is what i got going on. i have taken a engine lid and cut a 10" diameter hole and put a push 10" spal fan in the hole pointing out of the engine bay. for the obvious reason of cooling the hole thing now all i need is to build a scoop or put a scoop on top of it any ideas? key part will be dealing with the kink in the hood... yes the whole goes over that kink so here is pic of the set up now any ideas for hood scoop about 2-3" tall and 12-14" wide and mabey 14-16" long? Last but not least the throttle cable problem... the bracket that holds the throttle cable is to short it doest hold the cable tight any ideas? Thanks for all the help and my thought is if i get al this info i need ill be running by febuary.