Quote:
Originally Posted by delgato
Thanks Kazin1111, What is a side to side kit? where specifically can I get one.
I will have to look up the posts of your troubles.
I am curious, did you feel you should have upgraded the BT flywheel, they are already light?
|
side2side is a company ran by kamelion (spell check) and I think mr220v has his hands in it somehow as well. (I could totally be wrong about this) they have advertisements on the forum or you can go straight to the site
Side 2 Side Racing Inc. they have complete mr2 20v kits. i have ordered 2 vaccum hose kits from them and they both came with downloadable exact instructions. each hose had its own number and each pic had the numbers to match where the hoses belong. I ordered a kit that specifically was for a st with velocity stacks. I now have a kit comming that is specific for bt with velocity stacks. (and no hanger) the hoses are much thicker and stronger than the stock ones, and come in different colors. I was very impressed with it and plan on ordering a fuel hose from them, as well as a coolant kit. (if I don't sell my car) now.
as far as the clutch and flywheel go. I very much do regret not replacing them with a lighter model. I'm new to this mr2 thing, and have never dealt with a stock clutch. I've had 5 hondas, and a miata. all with at least a stage 2 flywheel clutch kit. The stock one just doesn't grip hard enough. and it is very difficult to keep the rpms above 5k without having to rev it up way too high. I did purchase a short throw shifter kit from twosrus.com and it made a pretty big difference on shifting, but every time I rev it or step on the clutch i'm reminded of how it COULD feel.
Save yourself the trouble of having to play with the vacuum hoses. save yourself the time of having to lengthen your fuel line. ( I just figured out mine leaks when driving which is why my gas mileage is crappy) save yourself the trouble of having to fab a hose kit. Mine works, but it rubs against the exhaust manifold when I turn. I also went with a stainless steel braided cable for my tranny. made a big difference on the pressure I feel when I step on the clutch. get the polyurethane mount inserts if you can. the real ones on twosrus or on ebay ( i went with ebay) motor doesn't slip so much when I exit a turn. if there is anything else I can think of I'll let you know.