Toyota MR2 Message Board - View Single Post

nikn · 01-25-2009, 11:37 AM

aftermarket lsd's should work with both non lsd axles and lsd axles. Either way, machining axles is cheap compared to cost of a new kaaz lsd.

If you want to install kaaz, you will need to buy some other trans parts too. Like the speedo gear. And lsd bolts. It's like a total of 75$ ish assuming you don't replace anything else in your trans, which you probably will want to while you have it apart. Actually... the kaaz may come with the bolts... so then it would be 50$ ish.

01-25-2009, 11:37 AM	#10 (permalink)
nikn Cage Fighter Join Date: Jan 2007 Location: dirty jerzey Posts: 162 Thanks: 12 Thanked 3 Times in 3 Posts iTrader Rating: (5/100% )	aftermarket lsd's should work with both non lsd axles and lsd axles. Either way, machining axles is cheap compared to cost of a new kaaz lsd. If you want to install kaaz, you will need to buy some other trans parts too. Like the speedo gear. And lsd bolts. It's like a total of 75$ ish assuming you don't replace anything else in your trans, which you probably will want to while you have it apart. Actually... the kaaz may come with the bolts... so then it would be 50$ ish. Last edited by nikn; 01-25-2009 at 11:50 AM..