Toyota MR2 Message Board - View Single Post - 5S-FE MK2 Non-Turbo Engine Info on my Webcam 5sfe Cams

CrawlingEye · 01-28-2009, 04:57 PM

I'll also add that the head and cams are from a '91 (it's Marco's old head, if anyone recalls his build).
The original cams were ground too low to feasibly shim, which is why it was decided to use the 3sfe cams.

I had quite a bit of additional work done to the head beyond the cams but it was not a '91 head with '93 cams being used.

01-28-2009, 04:57 PM	#10 (permalink)
CrawlingEye token camry guy Join Date: Jan 2009 Location: Easton, PA Posts: 7 Thanks: 0 Thanked 1 Time in 1 Post iTrader Rating: (0/0% )	I'll also add that the head and cams are from a '91 (it's Marco's old head, if anyone recalls his build). The original cams were ground too low to feasibly shim, which is why it was decided to use the 3sfe cams. I had quite a bit of additional work done to the head beyond the cams but it was not a '91 head with '93 cams being used. Last edited by CrawlingEye; 01-28-2009 at 05:02 PM..