|
The entirety of head work was done by ChrisK (cams aside, which were done as I previously mentioned by Ken).
The buckets (as I recall) are JDM TRD Altezza buckets, the year/generation I'm uncertain of. You'd be best served to shoot him an e-mail for the exact information.
As for the bottom end, the engine was recently shortblocked but I haven't had the time to do much else, it's pretty much stock at the moment. The head was milled for compression, which I believe the estimates are around 10-1 (so a .5 increase). I haven't touched the rods, but it is something I'm planning to do in the future. I wouldn't mind throwing some 3s rods in there and putting some 11-1 or so pistons in.
As for the injectors, I was looking into the 3sge injectors (light green, I believe they are) and I still need to purchase an adjustable FPR for it. It's been one of the things preventing me from getting the project really moving along.
|