Toyota MR2 Message Board - View Single Post

328FTW · 02-03-2009, 11:36 PM

My PSUs are solid for now, I might go to an X3 phenom when prices drop and then I'll drop the 600W PSU my friend has in it. It is a good brand so I know it will work, my current one is a 400W with good amperages for the rails I tried a cheap high wattage one and the 12v rail was not enough to run it with the graphics card at full power. I have a 150W as well running the lights and the HDDs and DVD drives, actually uses an MR2 relay I ghetto rigged to turn it on with the main PSU. My friends laugh at it but it cost 1/2 what theirs did and looks better especially since I cleaned up the wiring.

Thanks for the offer though.

02-03-2009, 11:36 PM	#4 (permalink)
328FTW 3vzfe tinkering Join Date: Aug 2008 Location: New Zealand Posts: 1,531 Thanks: 12 Thanked 99 Times in 83 Posts My Google Map iTrader Rating: (0/0% )	My PSUs are solid for now, I might go to an X3 phenom when prices drop and then I'll drop the 600W PSU my friend has in it. It is a good brand so I know it will work, my current one is a 400W with good amperages for the rails I tried a cheap high wattage one and the 12v rail was not enough to run it with the graphics card at full power. I have a 150W as well running the lights and the HDDs and DVD drives, actually uses an MR2 relay I ghetto rigged to turn it on with the main PSU. My friends laugh at it but it cost 1/2 what theirs did and looks better especially since I cleaned up the wiring. Thanks for the offer though.