Thread: Inner Fender
View Single Post
Old 02-11-2009, 10:53 PM   #13 (permalink)
TreyMR2
Gen3 swap DONE!!
 
TreyMR2's Avatar
 
Join Date: Jun 2007
Posts: 2,472
Thanks: 30
Thanked 60 Times in 58 Posts





Here's my list if you can get the gasket I just need that added on with shipping.

53875-17030 - $57.10 - Fender liner, front, RH
53876-17030 - $57.10 - Fender liner, front, LH
90159-60492 - $0.53 - Screw (x4 = $2.12)
90159-A0012 - $0.46 - Screw (x10 = $4.60)
90179-06104 - $0.65 - Nut (x8 = $5.20)
90189-06100 - $1.05 - Grommet (x2 = $2.10)
90189-06146 - $0.78 - Grommet (x4 = $3.12)
53879-14010 - $1.39 - Retainer (x4 = $5.56)
90189-06006 - $0.87 - Grommet (x4 = $3.48)
90189-06028 - $0.60 - Grommet (x2 = $1.20)
90467-06052-22 - $0.81 - Clip (x2 = $1.62)
90189-06114 - $1.05 - Grommet (x2 = $2.10)

76857-17020 - 7.28 - Retainer, upper right
76858-17020 - 7.28 - Retainer, upper left
76853-17020 - 21.11 - Retainer, upper center
76863-17040 - 11.66 - Retainer, lower right
76864-17020 - 11.66 - Retainer, lower left
76861-17030 - 21.11 - Retainer, lower center
90269-03003 - 0.87 - Rivet (x2)
90179-06274 - 0.53 - Nut (x11)
90179-06185 - 2.05 - Nut (x4)

90110-10015 - $0.99 - Bolt, hexagon socket
TreyMR2 is offline   Reply With Quote
 
Page generated in 0.13180 seconds with 16 queries