Toyota MR2 Message Board - View Single Post - Cutting the strut shock rubber boot cover?

webyosan · 02-23-2009, 03:06 AM

Here's the pics with the car on floor--Most of the coils are up...I did search and read other people issue with the driver side clunking when hitting pot or bumps I have after yesterday's installement. Notice I pulled the bump stop down to see if I needed it to cut it.. Eibach + Tokico Blue

So far I found this from another aw11 owner..upside down

The car drives great and corners good on street, but I've been concerned about installing the front spring upside down as the Eibach logo is right side up right now, but the rear has to have the logo upside down(Obviously compared with the OEM rear springs.)

02-23-2009, 03:06 AM	#1 (permalink)
webyosan No Skills Join Date: Sep 2008 Posts: 5 Thanks: 0 Thanked 0 Times in 0 Posts iTrader Rating: (0/0% )	Eibach springs front? Here's the pics with the car on floor--Most of the coils are up...I did search and read other people issue with the driver side clunking when hitting pot or bumps I have after yesterday's installement. Notice I pulled the bump stop down to see if I needed it to cut it.. Eibach + Tokico Blue So far I found this from another aw11 owner..upside down The car drives great and corners good on street, but I've been concerned about installing the front spring upside down as the Eibach logo is right side up right now, but the rear has to have the logo upside down(Obviously compared with the OEM rear springs.) Last edited by webyosan; 02-23-2009 at 08:00 PM.