|
I have had the same problem in my 93T. I pulled both the headliner and the trim pieces covering the rear quarter windows. Low and behold it looks as if my 2 was wrecked (rolled maybe) at some point in its former life. It was put back together and you wouldn't know if from the outside, but from the inside, you can see it wasn't done very well. I found a bunch of styrofoam jammed up in the holes in the metal piece that covers the driver's side rear quarter. Pulled all of the foam out and sure enough, the drain tube was folded over a couple of times and stuffed up in there. I pulled it out and a bunch of nasty sludgy water came pouring out. I re-routed it back to the correct hole in the side vent box, but I have a question:
Where should the tube be routed once it comes out of the drain hole in the T-Top? Does it stay up behind the metal piece around the window? At some point it would have to come out of the metal in order to drop into the side vent. Does it come out of the large hole in the metal piece about half way down, or does it stay above the metal piece and pop out the last hole down? Pictures would be appreciated!
Thanks,
Tony D
|